INSTALLATION

STABLE MATS ARE SIMPLE TO INSTALL.  FRELONIC MATS COME PRE-PACKAGED FOR BOTH 12 X 12 FOOT AND 10 X 12 FOOT STALLS. MAT SETS ARE CONFIGURED TO PROVIDE APPROXIMATELY 1/2" SPACE FROM ALL STALL MAT EDGES TO THE STALL WALLS. IT IS IMPERATIVE THAT ALL MAT INSTALLATIONS PROVIDE APPROXIMATELY 1/2" SPACE FROM ALL STALL MAT EDGES TO THE STALL WALLS. OTHER SIZE STALLS CAN BE INSTALLED BY TRIMMING FOR SMALLER STALLS OR ADDING ADDITIONAL INTER-LOCKING MATS FOR LARGER STALLS. MATS TRIM EFFORTLESSLY WITH A UTILITY KNIFE OR POWER SAW.

(NOTE - FRELONIC STALL MATS ARE SPECIFICALLY DESIGNED FOR  INDOOR STALL USE ONLY AND FOR NO LARGER THAN 12' X 16' CONFIGURATION)

SUB-SURFACE PREPARATION

FOR MAXIMUM EFFECTIVENESS SUB-SURFACE PREPARATION IS EXTEMELY IMPORTANT. FRELONIC MATS CAN BE PLACED OVER CONCRETE, WOOD, ASPHALT OR CRUSHED STONE. A CRUSH STONE BASE SHOULD COMPRISE OF 1/4" STONE IN SIZE AND BE APPROXIMATELY 3-6 INCHES DEEP. THE CRUSH STONE BASE SHOULD EXCLUDE ANY DIRT.

SURFACE MUST BE COMPACTED AND LEVELLED. ONCE COMPLETED, YOUR FRELONIC LIGHT WEIGHT INTERLOCKING MATS CAN BE IMMEDIATELY INSTALLED.